Previous
Next

Dust Collection

P|Flux: 1 Cyclone Dust Collector

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum. This is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the P|Flux without a bag, you can simply shut off the system using a valve offering you speed and flexibility.

THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK

Features

  • LED shows when drum if full
  • LED shows when filter needs cleaning
  • Swing-away doors sports acoustic foam on the inside to lower noise level
  • Motor HP: 1.5 HP
  • Phase: 1
  • Voltage: 110V

Starting At

$1,799.00

SKU:

MDCPF15110

*220V Option Available – Sold Separately

Amps: 18.8 Amps

Recommended Breaker: 30 Amp

Hertz: 60

Plug: No

RPM: 3450

Control Panel: Embedded Anodized Aluminum w/ Magnetic On/Off

Hand Held Remote: High Frequency

Shop Setting CFM*: 900

Inlet CFM: 1314

Max Static Pressure (Inches of Water): 10.1″

Impeller/Fan Size: 13.5″

Impeller Material: Steel

Impeller Type: Radial Fin

Balanced To: ISO 1940

Inlet Diameters: 6″ Manifold 4″ x 2

Drum Capacity: 25 Gal

Octagon Drum: Low Pressure Suction

Drum Collection Bag (Dia. L): Plastic Bag (24″ x 37⅜”)

Canister Filter Type: HEPA

Filtration Efficiency: 0.4 Micron at 99.2%

MERV Rating: 16+

Canister Diameter: 400mm (15.75″)

Canister Length: 500mm (19.69″)

Filter Surface Area: 4.5m²/48ft²

Canister Cleaning: Clean using external air compressor (not included)

Canister Filter Lower Dust Collection: Metal end cap with 4″ hookup window & quick release

Frame Wheels: (4x) 4″ PU Caster

Drum Wheels: (4x) 4″ PU Caster

US/CSA Approved: Yes

Decibel Reading: 70dB (at 9.8ft)

Machine Weight: 122kgs/269lbs

Assembled Dimensions (L x W x H): 45½” x 24¼”; x 68½” (1078 x 614 x 1722mm)

Shipping Weight: 331 lbs

Shipping Dimensions (L x W x H): 43in x 25in x 68in

 

 

How CFM Is Calculated & More

Explore All Dust Collector Accessories

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group

Laguna Dust Collector Facebook Group

Dust_Collection_Chart