Industrial Dust Collectors

E|Flux 1HP Fume Extractor / Air Cleaner

The E|Flux is designed to extract the unwanted chemicals and fine debris from the air using advanced filtration and adsorption techniques. It can be used as an extraction machine with the 4” inlet or as an ambient air cleaning machine with the air calculator lid.

The machine can be turned on and off with the included HF remote control. Laguna Tools offers low cost and readily available filter replacements.


  • 450CFM Fume Extractor And Industrial Quality 1000CFM Air Circulator
  • Interchangeable, Easily Replaceable, High Quality Filters
  • Multi-Purpose Machine
  • Modular Design To Fit Different Applications
  • Laguna Clean Air Design

Starting At


+ $199 Freight



High Airflow

70 mph air flow. The competition? About 40. The Eflux|1 is equipped with a 1hp TEFC motor and 12” precision balanced fan. The result is a wicked fast 6100 ft/min (or 70mph) air stream straight through the inlet. This equates to a volumetric flow rate of 450CFM. How impressive is this? The next time you are out on the road going 70mph on the open road roll down the window. That’s the same power the EFLUX 1 supplies to clean air.

Four Stage Laboratory Proven Particulate Filtration

Prior to Fume Abatement, the Laguna E|Flux is a four stage filtration machine:

  1. The first stage is an Aluminum spark arrest filter, which is very porous and is designed to stop any sparks that may come through the fume extractor. Additionally, it will catch debris and cutout material that may be extracted.
  2. A low-cost consumable pre-filter rated for high air flow and 100 micron efficiency. This Filter will need to be replaced often, it is a good idea to purchase extras.
  3. The third stage is a pleated 6Micron pre-filter that will catch small particles of dust and protect the HEPA Filter from contaminants.
  4. The final particulate filter is a premium HEPA approved 0.02 micron deep pleat filter that removes the smallest particles prior to fume abatement

These filters and other options are available from Laguna tools at prices that keep your shop clean AND profitable.





SKU: PDCEF-Pre Filter



SKU: PDCEF-Bag Filter





Fume Control

The final stage is a laboratory selected carbon-chemical blend in a porous containment bag. This is the process that removes the odors and harmful molecules from the air through a process called adsorption. The supplied amount is 2 6Kg. Bags, but up to 3 bags can be used in the machine.

Ambient Air Cleaner

Cleaner air is always better. Chances are, your shop could use an ambient air cleaner. The Eflux 4” inlet lid can be removed and replaced with the EFLUX circulator lid, and now you have an air circulator the will outperform ANY air cleaner in air filtration and most of them in air flow. What applications can the EFLUX Air Circulator be used for?

  • Smoke
  • Wood Dust Sanding
  • Paint Striping
  • Chemical Cleaning
  • Welding
  • Soldering
  • Enjoying A Cigar After A Job Done Right

Modular Design

Most applications need a specific filtration layer to optimize the process. For example, when cutting acrylic on a CO2 laser machine the extracted fumes collegiate into a sticky gel like substance with time – so an inexpensive prefilter to protect other filters should be used first. When engraving into wood a bag filter, and higher volume adsorption filter is best to collect the dust and extinguish the smell. Test it out, change it around, do what works best for you and your application – we’ll supply and customize what you need to clean the air in your workspace.

The E|Flux Fume Extractor Was Designed To Be Forgotten

A simple and elegant design that does its job without the setup, hassle, or frustration. Out of the box, the machine is ready to be hooked up to a 500CFM extraction source.

Simple. Elegant. Laguna Clean Air Design.


Package Dimensions (W x L x H): 24″ x 22.8″ x 55.5″

Product Assembled Dimensions (W x L x H): 20″ x 19″ x 50″

Package Weight: 220 lbs

Product Weight: 154 lbs

Product Category: Air Handling Machines

Product Subcategory: Fume Extracting Machines

Certifications: CSA – 70193234, CE, ISO 9001



Electrical: 120V/6Hz/1ph

Running Amperage: 120V-10A 220V-5A

Motor Type: AC Induction With Double Sealed Bearings

Motor Power: 1HP

Fan Size: 12″

Switch: Magnetic 110V (220V Option Available)


Air Flow

Inlet Diameter: 6″ Standard (4″ Inlet Hood Option Available)

Maximum Static Pressure: 6″ H20

Inlet CFM: 450 CFM

Inlet Static Pressure: 3.21″ H20

Filter Arrangment: Aluminum Catch, Consumable Filter, 6 Micron Bag Filter, 0.2 Micron HEPA Filter, 12 kgs Chemical Filter Mix

Filter Surface Area: N/A

CFM w/ Air Filtration Hood: 1000CFM (108in&sup2 Surface Area)