Planers

16" 4 Post Planer with ShearTec II

The New Laguna 16” Planer is best in class for many reasons. The ShearTec II Cutterhead is a 6 row system; most planers offer only 4 or less. This means the ShearTec II will last longer. 4 sided German carbide knives give a better finish, while deep gullets & thicker knives allow for better removal.

THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK

Features

  • Motor: 5 HP 1 Phase 220 volt TEFC
  • Readout: Digital with Tape Backup
  • Table: 56” D X 16” W Incl. 2 X Cast Iron Extensions
  • ShearTecII 4-sided German Solid Carbide Cutterhead
  • Inserts: 6 Rows x 18 Knives = 108 Total

Starting At

$2,999.00

SKU:

MPLAN1510-0130

Laguna Shear-Tec II

ShearTec-Screw-Top.png
ShearTec-Screw-Side.png
ShearTec-Screw-Driver.png

T-Shoulder

  • T-shaped step recess design is less suspectible to breaking
  • Laguna Shear-Tec II can handle torque force up to 120lbs
  • Laguna Shear-Tec II is a 6-row system, better finish & longer life.
Sheartech_II_Head_1.png
Sheartech_II_Head_Logo.png
  • 6 Rows
  • 4-Sided
  • Ultra Quiet
  • Solid Carbide
  • Extreme Longevity
  • Crowned Leading Edge

Standard Head

ShearTec-Competition-Scredriver.png
ShearTec-Screw-Top.png
ShearTec-Comptition-Screw-Side.png

Cone-Shaped

  • Standard head only accepts max. of 65lbs of torque.
  • Standard cone-shaped design causes the knife to be brittle.

Another benefit with our planers is the noise level; customers cannot believe how ultra quiet they run! Digital Readout is included, something you usually have to pay extra for with other brands. Cast iron in/out feed extensions & a built-in wheel system comes standard.Where most planers in this range offer only 15” capacity & 3 HP, the Laguna stands out by having 16” width capacity & a powerful 5 HP motor. The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. Of course there are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & a smoother finish.


 

Inserts: 6 Rows x 18 Knives = 108 Total

2 Feed Speeds: 16 + 20ft/min

Mechanical Adjustment of Bed

Mechanical Adjustment of Bed Rollers

4″ Dust Hood

In/Out Feed Cast Extensions Included

Capacity Min-Max:3/16″ – 8″

Max Removal: ⅛”, 3mm

Machine Dimensions (L x W x H): 44″ x 35″ x 43″

Shipping Dimensions (L x W x H): 31″ x 30″ x 46″

Weight (Net/Ship): 567/668 lbs

Explore All Planer Accessories

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group