This sander is perfect for the removal of slag, mill scale, burrs, dross, and sharp edges on small metal parts. The SPS-9 creates a pleasing, straight-line graining finish detail. This sander excels at surface conditioning square tubing of any length (down to 5 inches), and has a compact footprint appreciated by custom shops, especially those running “high volume” small metal parts.”
+$399 Freight
Main Motor: 5HP, 3 Phase, 220V
Conveyor Motor: 1/4HP
Conveyor Speed: 3.3 – 19.7ft/min
Maximum Material Width: 9″
Maximum Material Thickness: 4″
Minimum Material Thickness: 1/16″
Minimum Material Length: 5″
Dust/Chip Collection Port: 4″
Main Motor: 5HP, 3 Phase, 220V
Conveyor Motor: 1/4HP
Conveyor Speed: 3.3 – 19.7ft/min
Maximum Material Width: 9″
Maximum Material Thickness: 4″
Minimum Material Thickness: 1/16″
Minimum Material Length: 5″
Dust/Chip Collection Port: 4″
| Model Number | SPS-9 |
|---|---|
| Part Number | MSAN9x5-1K-5-0197 |
| Main Motor | 5HP, 3 Phase, 220V |
| Conveyor Motor | 1/4HP |
| Conveyor Speed (ft/min) | 3 – 18 |
| Maximum Material Width (in) | 9 |
| Minimum/Maximum Material Thickness (in) | 1/16 – 4 |
| Minimum Material Length (in) | 5 |
| Dust/Chip Collection Port (in) | 4 |
| Model Number | SPS-9 |
|---|---|
| Part Number | MSAN9x5-1K-5-0197 |
| Main Motor | 5HP, 3 Phase, 220V |
| Conveyor Motor | 1/4HP |
| Conveyor Speed (m/min) | 0.9 – 5.5 |
| Maximum Material Width (mm) | 228 |
| Minimum/Maximum Material Thickness (mm) | 1.6 – 100 |
| Minimum Material Length (mm) | 127 |
| Dust/Chip Collection Port (mm) | 100 |
Complete this short form &
a Laguna Representative Will Contact You Shortly
