The SGB-6 is a great option for smaller production facilities.
Not all businesses have the volume for processing with a wide belt sander. If the parts are too small, not flat or have a variance in material thickness, then you found the right machine for your needs.
Also a good addition would be for a larger facility which cannot process all parts with a wide belt or brush sander. This machine also requires less training and experience than what is required for hand processing materials.
+$599 Freight
Table Size: 31-1/2″ x 51″
Mark Speed: 200 – 1400 RPM
Vacuum Pump: 3 HP Vacuum Pump Motor
Vacuum Size: 10″ x 14″ Vacuum Hold-Down Area (Center)
Motor: 1HP Motor, Grinding
Power Requirement: 220 Volt, 3 Phase Machine
Table Size: 31-1/2″ x 51″
Mark Speed: 200 – 1400 RPM
Vacuum Pump: 3 HP Vacuum Pump Motor
Vacuum Size: 10″ x 14″ Vacuum Hold-Down Area (Center)
Motor: 1HP Motor, Grinding
Power Requirement: 220 Volt, 3 Phase Machine
| Model Number | SBG-6 |
|---|---|
| Part Number | MSANSGB-6-3PH |
| Motor (HP) | 1 |
| Abrasive & Brush Diameter (in) | 6 |
| Table Size (in) | 33–1/2 x 51 |
| Mark Speed (RPM) | 200 – 1400 |
| Vacuum Pump (HP) | 3 |
| Vacuum Size (in) | 10 x 14 Vacuum Hold-Down Area (Center) |
| Power Requirements | 220 Volt, 3 Phase Machine |
| Model Number | SBG-6 |
|---|---|
| Part Number | MSANSGB-6-3PH |
| Motor (HP) | 1 |
| Abrasive & Brush Diameter (mm) | 152 |
| Table Size (mm) | 850 x 1295 |
| Mark Speed (RPM) | 200 – 1400 |
| Vacuum Pump (HP) | 3 |
| Vacuum Size (mm) | 254 x 355 Vacuum Hold-Down Area (Center) |
| Power Requirements | 220 Volt, 3 Phase Machine |
Complete this short form &
a Laguna Representative Will Contact You Shortly
SGB-6 Manual