Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.
Redesigned banjo features a more compact design, 45° cutout & wider base.
Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.
And YES, this amazing control panel comes standard with the Revo 24|36
THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK
Get 10% off this machine and other accessories!
View Deals >
This machine is part of the Laguna Tools August Promo. Get amazing deals on this and more View Deals >
Recommended Breaker Size: 15 Amp
Remote Control Box With Speed Settings
Two Ergonomic Control Panel Positions: High/Low
Drive Belt: Poly-Groove With EZ Access
Tailstock Quill: 4-½″, Engraved, Self-Ejecting
Floor Top Spindle Center: 44-½″
Front Bearing: TPI Taiwan 6307LLU
Rear Bearing: TPI Taiwan 6205LLU
Spindle Index #: 14/36/48 with Lock
Distance Between Centers: 36″
Headstock Through-Bore: ⅜″
Tailstock Storage Of Centers
Toolrest Post Size: 1″
Spindle Size: 1-¼″ x 8 TPI RH
Floor To Bed: 32-½″ with Pads
Spring Loaded Spindle Lock
Maximum Outboard Turning Diameter: 38″ (w/ Optional 20″ Extension Installed)
Swing Over Banjo: 19-¾″
Accepts Vacuum Chuck: Yes
Face Plate: 3″ Diameter
Tool Rest: 12″
Steel Bed: ASTM A36
Bed Gap: 50mm
Headstock Spindle: MT2 Taper Hardened To 40° HRC
Live Center Threads: 3/4″ – 10 UNC
Tailstock Quill: #2 MT
Swing Over Bed: 24″
RPM High: 135-3500
RPM Low: 50-1300
Plug: 6-15P
Dimensions (W x D x H): 60″ x 26″ x 52-¼″
Shipping Weight: 610 lbs
Shipping Dimensions (L x W x H): 36″ x 40″ x 50″
Open the manual below and click any highlighted part to purchase online
Revo 24|36 Manual