Jointers

8" Wedgebed Jointer ShearTec II

The Laguna 8” Wedgebed Jointer ShearTec II Cutterhead is the perfect “step-up” jointer with increased capacity for serious woodworking.The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing.The cast-iron in-feed and out-feed tables feature independent adjustment on dovetail ways.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK

Features

  • Motor: 2HP, 220 Volt, 1 phase,TEFC
  • Cutter-Head RPM:5600
  • Motor Amperage Rating: 8A

$1,999.00

SKU MJOIN8012-0130 Category
CSA Logo

Laguna Shear-Tec II

ShearTec-Screw-Top.png
ShearTec-Screw-Side.png
ShearTec-Screw-Driver.png

T-Shoulder

  • T-shaped step recess design is less suspectible to breaking
  • Laguna Shear-Tec II can handle torque force up to 120lbs
  • Laguna Shear-Tec II is a 6-row system, better finish & longer life.
Sheartech_II_Head_1.png
Sheartech_II_Head_Logo.png
  • 6 Rows
  • 4-Sided
  • Ultra Quiet
  • Solid Carbide
  • Extreme Longevity
  • Crowned Leading Edge

Standard Head

ShearTec-Competition-Scredriver.png
ShearTec-Screw-Top.png
ShearTec-Comptition-Screw-Side.png

Cone-Shaped

  • Standard head only accepts max. of 65lbs of torque.
  • Standard cone-shaped design causes the knife to be brittle.

Adjustment: Wedge-Bed With Crank

Max Width: 8″

Max Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Carbide 6 Row x 9: 54

Cutter-Head Diameter: 3″

Table Dimensions: 8″ x 75″

Fence Dimensions: 4⅝” x 38″

Fence Tilt: 45°. 90° & 45° Positive Stop

Table Height: 32″

Dust Port: 4″

Wheel System: Built-In

Weight (Net/Ship): 510/600 lbs

Shipping Dimensions: 80in x 30in x 13in

Explore All Jointer Accessories

Online Dealers

Local Dealers


 

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group

Adjustment: Wedge-Bed With Crank

Max Width: 8″

Max Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Carbide 6 Row x 9: 54

Cutter-Head Diameter: 3″

Table Dimensions: 8″ x 75″

Fence Dimensions: 4⅝” x 38″

Fence Tilt: 45°. 90° & 45° Positive Stop

Table Height: 32″

Dust Port: 4″

Wheel System: Built-In

Weight (Net/Ship): 510/600 lbs

Shipping Dimensions: 80in x 30in x 13in

Explore All Jointer Accessories

Online Dealers

Local Dealers

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group