M|Flux 5 Fume Extractor Machine Overview | Laguna Tools
Explore the M|Flux 5 Fume Extractor here: https://bit.ly/32YgrUW
The m|flux:5 fume extractor from Laguna is designed to provide air filtration for laser machines. The intake on top of the unit offers 4 x 4” inlets with a central 6” inlet. Any combination of inlet – 1x4”, 2x4”, 3x4”, 4x4”, 1x6”- can be used with this unique design.
Materials such as acrylic and wood emit noxious fumes when cut or engraved by the laser machine. These fumes are harmful to our lungs, as well as harmful to the machine, and should be filtered or drawn away from the machine. This fume collector allows you to efficiently filter out these fumes and fine debris from the air.
The HEPA filter offers 99.99% filtration efficiency of greater than 0.3 micron.
Two different kinds of Charcoal filter are utilized: the M3000 (2”) mitigates fumes by physical absorption, the M9000 (2”) mitigates fumes by chemical reaction. Below the filters sit a 1HP 110 volt TEFC motor and fan that supplies 400CFM and high static pressure to pull the air through the filters.
►Subscribe now: http://bit.ly/2r5Czgc