Laguna LogoGrey.svg

Flexible financing available - get the tools you need today!

Wood MagFeatured1

Compact And Clean Shop

After serving 11 years in the Marine Corps followed by 30 years working for the federal government, Tom Medina would have loved to construct a big woodworking shop in his backyard. His deeply sloping property prevented that, however. So instead, he built the best, most practical basement workshop that fit in the space he had. On the plus side, the slope makes the basement a walk-out, which makes it easy to bring supplies and equipment into the shop.

Tom takes dust mitigation and collection seriously. His air-filtration system, wallmounted above his router table, more than handles the size of his 210-square-foot shop. For efficiency the filter’s air intake faces the business end of his belt sander, which generates the most dust.

wood mag9
Wood mag1
Using a prefab butcher-block top, Tom built his main workbench complete with a face vise, dog holes, and a machinist’s vise.
wood mag3
A shop-made, magnetically mounted dust port attaches to a fixed steel plate mounted to the drill-press column. Tom can raise and lower the port to accommodate the workpiece thickness.

Tom tucked a wall-mounted garage/shop vac into a corner. Its 20′ hose reaches anywhere in the shop for cleanup and connects to portable hand or stationary tools, such as his plunge router and random-orbit sander.

The dust-collection system starts with 4″ PVC ductwork run just above his benchtoptool workstation and piped into the dust collector in an adjacent room. He connects that run to the tablesaw and other tools with flexible hose only when needed. He made custom dust ports for his drill press and mitersaw (shown above).

A lowered mounting surface for the drill press brings the table height to a more comfortable working level.
wood mag6
wood mag5
The custom dust port for the mitersaw integrates with the fence and connects to a pair of hoses in the back. The replaceable zero-clearance insert up front helps direct dust, and eliminates chip-out for cleaner cuts.
Buy a garage vac like the one Tom uses woodmagazine.com/garagevac
wood mag7
wood mag4
Purchased cabinets topped with laminate countertops form a space-efficient workstation for benchtop tools.

Benchtop tools, including an oscillating spindle sander, jointer, and belt sander, occupy space on the bench under the main dust-collection duct. The benchtop drill press rests on a custom cabinet built between two of the main base cabinets. Although his tools share only two dedicated 110-volt circuits, Tom says he’s never tripped a circuit breaker. His dust collector runs on a dedicated 20-amp circuit.

“I am fully retired and my shop is the neutral corner I retreat to when I get underfoot and begin to annoy my bride of 38 years,” he says. 🌳

This piece was originally featured in Wood Magazine's November 2021 Issue
Used with permission from WOOD® ©2021, Meredith Corporation. All rights reserved
Picture of Tom Medina

Tom Medina

Tom Medina took an interest in woodworking in high school. Lately, his projects have included presentation cases, chess and backgammon storage cases, and speaker cases.

LAGUNA LOGOWhite 1
Venta de Maquinas CNC
O solicite una cotización
Financiación Disponible
Your cart is currently empty.

Request CNC quote

Schedule a Consultation