Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND® Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
Need a larger machine? Check out our 37×2 Drum Sander.
THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK
INTELLISAND® Technology: Automatically adjusts conveyor speed based on load
– Prevents gouging, damaging or burning stock
– Provides consistent finish even with varying grain pattern and density
– Greatly increases abrasive planing and dimensioning
The 25×2 Double Drum Sander features INTELLISAND® Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor.
Dimensions (H x W x D): 43″ x 46″ x 31″
Drum (Extruded Aluminum): 5″ x 25″
Drum Speed: 1740 RPM
Dust Hood (Steel Hood, Hinged At Back): (2) 4″ Vacuum Ports, Min CFM: 1000 Recommended
Ball Bearing (1″): 4 sealed and permanently lubricated
Conveyor Motor: 100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
Drive Motor (TEFC): 5 HP, 1 Phase
Power Requirements: 208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service
Shipping Weight: 475 lbs
Shipping Dimensions (L x W x H): 50″ x 44-½″ x 44-½″
Casters Included: No
Cord & Plug Included: No