The digital readout provides a quick and easy reference for blade speeds. The DRO displays in “SFPM” (surface feet per minute). This is the speed that the teeth of the blade are moving. This number can be set by using a blade speed chart for the specific blade and material being used to achieve high quality cuts in a wide range of materials.
The speed control knob can be used to change the speed on the fly if needed, meaning that you can increase or decrease speed during the cut to optimize the performance of the blade in the specific material being cut. It is conveniently located on the control panel adjacent to the DRO display.
The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.
The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.
Motor Voltage/HP
166VDC / 1 3/4 HP
Supply Voltage
110V Single Phase
Throat
13-5/8" (346mm)
Table, Cast Iron
16" x 21-1/2" (406.4mm x 546mm)
Table Tilt
- 7 Degrees + 45 Degrees
Miter Slot
3/8" x 3/4" (9.525mm x 19.05mm)
Table Height
38" (965mm)
Blade Speed Range High
160 - 4400 ft/min
Blade Speed Range Low
60 - 1600 ft/min
Fly Wheel
Cast Iron
Resaw Capacity
13" (330.2mm)
Minimum Blade Length
114-3/4" (2,914mm)
Maximum Blade Length
116" (2,946mm)
Maximum Blade Width
3/4" (19mm)
Minimum Blade Width
1/8" (3mm)
Guides
Laguna Ceramic
Height
70-1/2" (1,790mm)
Machine Dimensions (W X D)
Base FootPrint
29-3/4" x 28" (755mm x 712mm)
22-11/16" x 17-9/16" (576mm x 446mm)
Machine Dimensions w/ Mobility Kit(W X D)
Base FootPrint w/ Mobility Kit
36-5/8" x 28" (930mm x 712mm)
33" x 20-1/2" (838mm x 521mm)
Weight (Gross)
286 lbs. (130 kg)
Weight (Net)
264 lbs. (120 kg)
Package Size (W x D x H)
73-1/8" x 26-1/2 x 24-5/16"
(1857mm x 673mm x 618mm)
Mobility Kit
Optional "MBA 14|12 Wheel System"
Industrial Work Light
Optional
Complete the form to be among the first notified when the 14|CX becomes available through our authorized dealers
