Arcade Cabinet

Smartcade Materials

• ¾ sheet of melamine, plywood, or mdf
• Raspberry Pi 3.0
• Arcade Kit
  • Note: this kit is great if you’re not savvy with electronics because it comes with everything you’d need but otherwise the parts can be found cheaper separately.
• Wood Screws (alternatively you could adjust the drill command for ¼” dowels if you want clean sides on your cabinet)
• Monitor (This was designed for an old 3:4 ratio lcd screen but any screen will work with a little adjustment to the dimensions of interior parts)
• USB Speaker

Cut & Assemble Directions

1. Cut out the parts and assemble everything except the back and bottom pieces.
2. Attach the monitor (this is the most difficult part to get right)
3. Attach all the buttons and the joystick and wire everything together
   • Note: We bought the kit and the wires were pretty short. We needed some extra wire to connect everything together
4. Connect the monitor and speakers to the Raspberry Pi
5. Load up some games and configure the buttons