Bandit 4
The Bandit 4 is perfect for cabinet shops that are doing thin edgebanding from 0.4-3mm product. This machine features top/bottom and front/rear edge scraping and buffing. The Bandit 4 also has a swiveling control cabinet that enables you to control the machine during both job setup and while edgebanding material.
- Dual Motor End Trim
- Top & Bottom Trim
- Buffing & Scraping
- Quick Melt Glue System
- 3mm Capacity
$24,999
SKU: MEB-4/3-NEW
Model: MEB42203
Feed Speed: 15-23m/min(49-76ft/min)
Edge Thickness: 0.4-3mm (1/64″ – 1/8″)
Panel Thickness: 10-60mm
Panel Length: >150mm
Working Pressure: 0.6mpa
Power Requirements: 220V-3PH-60HZ, 50amp Breaker
Total Power: 9kW (12HP)
Panel Width: >40mm
Dust Port Outer Diameter: 98mm (3.85″) x 3
CFM Requirement: 1000 CFM
Compressed Air Requirement: 90 PSI, 12 CFM
Minimum Panel Size (L x W): 300mm x 40mm (11-13/16″ x 1-9/16″) /
150mm x 150mm (5-29/32″ x 5-29/32″)
Additional Details
Model: MEB42203
Feed Speed: 15-23m/min(49-76ft/min)
Edge Thickness: 0.4-3mm (1/64″ – 1/8″)
Panel Thickness: 10-60mm
Panel Length: >150mm
Working Pressure: 0.6mpa
Power Requirements: 220V-3PH-60HZ, 50amp Breaker
Total Power: 9kW (12HP)
Panel Width: >40mm
Dust Port Outer Diameter: 98mm (3.85″) x 3
CFM Requirement: 1000 CFM
Compressed Air Requirement: 90 PSI, 12 CFM
Minimum Panel Size (L x W): 300mm x 40mm (11-13/16″ x 1-9/16″) /
150mm x 150mm (5-29/32″ x 5-29/32″)
