CNC Turner Series

Bat Master CNC Turner

Woodturning - Production - Budget Friendly

The Bat Master is designed to give you years of safe service. Read this owner’s manual in its entirety before assembly or use.

Features:

  • Motor 3hp 220v single phase
  • Spindle Speed Variable (low 100 – 1200) (High 200 -3200 rpm)
  • Maximum Diameter 8″
  • Distance Between Centers 47″
  • Headstock and Tailstock Taper Morse number 2

Starting At

$28,998.00

SKU:

MCNC Bat Master

Fill out this form to receive a free quote for the Bat Master CNC Turner

Talk To A CNC Specialist Directly 800-234-1976

Explore The Bat Master CNC Turner

  • Tailstock Travel 4¼”
  • Spindle Thread 1¼” x 8TPI
  • Headstock and Tailstock Borer ⅜”
  • Cutter Motor 3.6HP 1 Ph 220V
  • Controller Laguna HHC (Hand Held Controller)
  • Volts One Phase 220V/30 Amp
  • Ball Screw Adjustable On Vertical Axis
  • Rack and Pinion On Horizontal Axis
  • 44″ Maximum Spindle Length
  • Blade Bore: 1″ Outside Diameter 10″
  • Machine Foot Print (L x W x H): 73″ x 24″ x 65″
  • Shipping Weight: 1400 lbs
  • Shipping Dimensions: 60in x 60in x60in
 

 

The advantage of the CNC machine is that it can, in most cases, fully machine the complete job without it being removed from the Lathe so that you have finished parts of high accuracy that are totally repeatable.

Noise Emission

The head stock is cast iron and houses the variable speed control and motor. The speed can be adjusted between 0 -1200 (low) 0-3200 (high).

Tail Stock

The tail stock is a cast iron construction, and the spindle has a travel of 4 ¼ in. It can accommodate centers and other tools which have a number 2 Morse taper. The tail stock can be moved to any position on the lathe bed and locked to suit the job in hand.

Bed

The bed of the machine consists of a heavy cast steel frame that supports the tail and head stock. Both the tail and head stock can be clamped in any position to suit the job in hand.

Gantry

The gantry runs along the back of the lathe and supports the linear bearing rods. The cutter head moves along the rods on linear bearings. It is moved along the length of the gantry rack and pinion that is controlled by the machine controller.

Frame

The frame is a heavy welded construction that supports all the other parts of the machine.

Cutter Head

The cutter head is moved vertically by a precision ball screw system that is controlled by the machine controller. The cutter blade is moved horizontally by a rack and pinion system that is controlled by the computer and allows various profiles to be machined.

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna CNC Facebook Group

GET A FREE QUOTE TODAY ON A BAT MASTER

Find out everything you can get with just a small deposit on a CNC Machine. From lifetime tech support to software training, speak with a CNC Specialist about what LAGUNA can offer you to get you the best experience with a CNC.

CNC Turner Series

Bat Master CNC Turner

Woodturning - Production - Budget Friendly

The Bat Master is designed to give you years of safe service. Read this owner’s manual in its entirety before assembly or use.

Features:

  • Motor 3hp 220v single phase
  • Spindle Speed Variable (low 100 – 1200) (High 200 -3200 rpm)
  • Maximum Diameter 8″
  • Distance Between Centers 47″
  • Headstock and Tailstock Taper Morse number 2

Starting At

$28,998.00

SKU:

MCNC Bat Master

  • Tailstock Travel 4¼”
  • Spindle Thread 1¼” x 8TPI
  • Headstock and Tailstock Borer ⅜”
  • Cutter Motor 3.6HP 1 Ph 220V
  • Controller Laguna HHC (Hand Held Controller)
  • Volts One Phase 220V/30 Amp
  • Ball Screw Adjustable On Vertical Axis
  • Rack and Pinion On Horizontal Axis
  • 44″ Maximum Spindle Length
  • Blade Bore: 1″ Outside Diameter 10″
  • Machine Foot Print (L x W x H): 73″ x 24″ x 65″
 

 

The advantage of the CNC machine is that it can, in most cases, fully machine the complete job without it being removed from the Lathe so that you have finished parts of high accuracy that are totally repeatable.

Noise Emission

The head stock is cast iron and houses the variable speed control and motor. The speed can be adjusted between 0 -1200 (low) 0-3200 (high).

Tail Stock

The tail stock is a cast iron construction, and the spindle has a travel of 4 ¼ in. It can accommodate centers and other tools which have a number 2 Morse taper. The tail stock can be moved to any position on the lathe bed and locked to suit the job in hand.

Bed

The bed of the machine consists of a heavy cast steel frame that supports the tail and head stock. Both the tail and head stock can be clamped in any position to suit the job in hand.

Gantry

The gantry runs along the back of the lathe and supports the linear bearing rods. The cutter head moves along the rods on linear bearings. It is moved along the length of the gantry rack and pinion that is controlled by the machine controller.

Frame

The frame is a heavy welded construction that supports all the other parts of the machine.

Cutter Head

The cutter head is moved vertically by a precision ball screw system that is controlled by the machine controller. The cutter blade is moved horizontally by a rack and pinion system that is controlled by the computer and allows various profiles to be machined.

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna CNC Facebook Group

GET A FREE QUOTE TODAY ON A BAT MASTER

Find out everything you can get with just a small deposit on a CNC Machine. From lifetime tech support to software training, speak with a CNC Specialist about what LAGUNA can offer you to get you the best experience with a CNC.