Fiber Marker | PM
Laguna Fiber laser marking machines are a new generation laser marking system made with the newest laser technology, designed for permanently marking and engraving metal as well as industrial polymers.
- 20 and 50 Watt Options
- 110 x 110mm Lens
- Laser Wavelength: 1064nm
- Up to 10,000mm/s Marking Speed
- Resolution: 0.001mm
- Repositioning Precision: 0.003mm
- Air cooling system
Laser Specs
- 1064nm Wavelength
- 20W/50W Average Power Output
- 20kHz – 80kHz Modulation Frequency Range
- File Formats: .plt, .dst, .bmp, .dwg, .ai, .las, supports AutoCAD, CoreDraw Direct output
- Raycus Q-Switch / JPT MOPA
Galavanometer Specs
Parameters
- 10,000mmm/s Maximum Speed
- 0.001mm Resolution
- 0.003mm Repositioning Precision
- 0.01mm Minimum Line Width
- 0.2mm Minimum Height of Characters
Optical Output
- F = 160mm
- Range: 110 x 110mm (with standard)
- 0.5KW
- AC: 220V
- 50Hz
- 0.01mm
- 150mm x 150mm
- 200mm x 200mm
- 220mm x 220mm
- 300mm x 300mm
- 0.2mm
- Air-Cooled
- 0 ~ 35 ℃, 90% Humidity
Fiber Marker | PM ManualLaguna Fiber Marker | PM CNC
Machine Details
Laser Specs
- 1064nm Wavelength
- 20W/50W Average Power Output
- 20kHz – 80kHz Modulation Frequency Range
- File Formats: .plt, .dst, .bmp, .dwg, .ai, .las, supports AutoCAD, CoreDraw Direct output
- Raycus Q-Switch / JPT MOPA
Galavanometer Specs
Parameters
- 10,000mmm/s Maximum Speed
- 0.001mm Resolution
- 0.003mm Repositioning Precision
- 0.01mm Minimum Line Width
- 0.2mm Minimum Height of Characters
Optical Output
- F = 160mm
- Range: 110 x 110mm (with standard)
- 0.5KW
- AC: 220V
- 50Hz
- 0.01mm
- 150mm x 150mm
- 200mm x 200mm
- 220mm x 220mm
- 300mm x 300mm
- 0.2mm
- Air-Cooled
- 0 ~ 35 ℃, 90% Humidity
The PM Fiber Marker achieves superb beam quality by minimizing the condensation diameter to less than 20um. And with a divergence angle that is ¼ of the semiconductor pumping source laser, the PM achieves consistent precision. This exceptional accuracy can be run at a marking speed of up to 10,000mm/s.
Because the Fiber PM has a high turnover ratio between electricity and laser usage, you’ll save on your usage and power bill. Up to the machine’s lifetime of 100,000 hours, the PM will keep your run costs as low. As well as having a minimal operating cost, the PM laser lens is completely maintenance free
To ensure the best possible outcome, the PM comes with a focusing system. You can manually adjust either before or during the operation to fine tune your project to your liking.
With an installation of a rotary table for multiple axis, you’ll be able to work on cambered surfaces.
