The redesigned PL12|20 laser from Laguna offers a complete ecosystem with optional rotary, fume collector, stand & software. The 40-watt laser makes quick work of complicated inlay techniques, cuts intricate designs out of wood, acrylic, and several other materials, along with perfect engraving lithography in most non-metallic materials. The PL12|20 has a full 12″ by 20″ workspace with a full 12″ Z-axis to fit large materials and a rotary device. The bottomless design allows the user to engrave large projects like tabletops and murals. The PL12|20 keeps raising the bar!
Running Amperage: 9.6A (14.4A with all components)
Recommended Breaker: Dedicated 15A on power strip for all components
Laser Tube: RECI Water Cooled 40W 15,000H working life
Optics: U.S. II-VI Focusing lens & Beam Combiner
Drive System: Leadshine Motors & 3PH Drivers
Linear Rails: Hiwin HG Resin Capped
Work Envelope: 12″ x 20″
Table Lift: 12″
Control Software: RUIDA RDWorks, Lightburn option
Engraving Speed: 0-500mm/s
Cutting Speed: 0-500mm/s
Laser Output Control: 0-100% Software controlled
Working Environment: 32° – 104°F, Humidity 5-95%
Net Weight: 300 Lbs (all components)
Ship Weight: 325 Lbs
Assembled Height: 10″/27″/40″ (top unit, with base, with base and stand)
Assembled Width: 40″
Assembled Depth: 30
Running Amperage: 0.9A
Net Weight: 21Lbs
Ship Weight: 26Lbs
Tank Capacity: 9L (2.3 Gal)
Flow: 10L/min (2.64 Gal/min)
Running Amperage: 1.3A
Air Flow: 5 CFM
Net Weight: 9.9 Lbs
Ship Weight: 10 Lbs
Phase: 1 Ph
Running Amperage: 2.6A
Horse Power: 1/3HP
Air Flow: 300 CFM
Automatically adjustable working table to fit odd shaped stock, a rotary attachment, and different tapes of mounts like a bead bed. The lifting height can reach 12”.
Autofocusing makes the laser head focus easily and quickly. Other models use a focal spacing block to adjust the focal length by hand. The Bed moves up until the workpiece hits the limit switch, and the focal length is always set at the exact height.
II-VI’s broad portfolio of optics is one of the largest and most advanced in the industry, leveraging deep expertise in diamond turning technology, magnetorheological finishing (MRF), and IBS coatings.
Reci Laser tubes are boasting optimal laser output power density, concentrated light beam, uniform light spot, highest working efficiency, and highest cutting speed. Each Reci tube has approximately a 15,000-hour working life.
The HG series linear rails are designed with load capacity and rigidity higher than similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial, and lateral directions, and self-aligning to absorb installation-error. Thus, the HG series linear rails can achieve a long life with high speed, high accuracy, and smooth linear motion.
Wifi Control allows the operator to work remotely and upload work files to the Laser unit form anywhere – just like a printer.