Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cabinet stand completely encases motor and pulleys to protect from dust and shavings.The specially-designed cast-iron fence is extra long for continued support throughout the cut.Modular cutterhead provides a consistently clean cut.
THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK
Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutter-head has to be removed, a new module can be fitted in place without production down-time. The extra-long table provides a full 83” of work support. The Laguna ShearTec II is at the cutting edge of Spiral Cutter head technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
Adjustment: Parallelogram With Crank
Max Width: 8″
Max Depth: 0.5″
Rabbeting Capacity: 0.5″
Knife System: ShearTec II
4 Sided Carbide 6 Row x 9: 54
Cutter-Head Diameter: 3″
Table Dimensions: 8″ x 83″
Fence Dimensions: 4.75″ x 40″
Fence Tilt: 90° & 45° with Positive Stop
Table Height: 33″
Dust Port: 4″
Wheel System: Built-In
Weight (Net/Ship): 648/750 lbs
Shipping Dimensions (L x W x H):92″ x 22″ x 49″
Speak and collaborate with fellow enthusiasts that own the same machine.
Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.