Jointers

6" Jointer ShearTec II

The Laguna 6” Jointer with ShearTec II is a premium jointer giving you more of everything.Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56”) allows for bigger jobs and last but not least: 6 row ShearTec II cutterhead with a total of 42 four-sided carbide inserts gives you the smoothest cut & longest life.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK

Features

  • Motor 1.5 HP, 110 Volt, TEFC
  • Motor Amperage Rating: 13A
  • Cutter-Head: 5000 RPM

$1,399.00

SKU MJOIN6100-0130 Category
CSA Logo

Laguna Shear-Tec II

ShearTec-Screw-Top.png
ShearTec-Screw-Side.png
ShearTec-Screw-Driver.png

T-Shoulder

  • T-shaped step recess design is less suspectible to breaking
  • Laguna Shear-Tec II can handle torque force up to 120lbs
  • Laguna Shear-Tec II is a 6-row system, better finish & longer life.
Sheartech_II_Head_1.png
Sheartech_II_Head_Logo.png
  • 6 Rows
  • 4-Sided
  • Ultra Quiet
  • Solid Carbide
  • Extreme Longevity
  • Crowned Leading Edge

Standard Head

ShearTec-Competition-Scredriver.png
ShearTec-Screw-Top.png
ShearTec-Comptition-Screw-Side.png

Cone-Shaped

  • Standard head only accepts max. of 65lbs of torque.
  • Standard cone-shaped design causes the knife to be brittle.

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.


 

Adjustment: Wedge-Bed With Lever

Cutting Width: 6″

Cutting Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Solid Carbide 6 Rows x 7: 42

Cutter-Head Diameter: 2.4″

Table Dimensions (W x L): 6″ x 56″

Fence Dimensions (W x L): 4″ x 29″

Fence Tilt: 90° & 45° with Positive Stop

Table Height: 32.2″

Dust Port: 4″

Wheel System: Built-In

Weight (Net/Ship): 388/425 lbs

Shipping Dimensions: 23in x 59in x 15in

Explore All Jointer Accessories

Online Dealers

Local Dealers


 

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.


 

Adjustment: Wedge-Bed With Lever

Cutting Width: 6″

Cutting Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Solid Carbide 6 Rows x 7: 42

Cutter-Head Diameter: 2.4″

Table Dimensions (W x L): 6″ x 56″

Fence Dimensions (W x L): 4″ x 29″

Fence Tilt: 90° & 45° with Positive Stop

Table Height: 32.2″

Dust Port: 4″

Wheel System: Built-In

Weight (Net/Ship): 388/425 lbs

Shipping Dimensions: 23in x 59in x 15in

Explore All Jointer Accessories

Online Dealers

Local Dealers

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group