Jointers

12" Parallelogram Jointer

Introducing the brand new 12” Laguna Parallelogram Jointer! Edge jointing is fine, but face jointing is what they all did back in the old world. Everything starts at the jointer, probably one of the most versatile machines you can own. You must have a flat surface to accomplish anything true and this is where it starts. If you want to do the job right, this is what you need.

THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK

Features

  • Motor: 5 HP, 220 Volt, 1 Phase, TEFC
  • Motor Amperage Rating: 22A
  • Cutter-Head RPM: 5500RPM

$4,999.00

SKU MJOIN12X86-5-1-0130 Category
CSA Logo

Laguna Shear-Tec II

ShearTec-Screw-Top.png
ShearTec-Screw-Side.png
ShearTec-Screw-Driver.png

T-Shoulder

  • T-shaped step recess design is less suspectible to breaking
  • Laguna Shear-Tec II can handle torque force up to 120lbs
  • Laguna Shear-Tec II is a 6-row system, better finish & longer life.
Sheartech_II_Head_1.png
Sheartech_II_Head_Logo.png
  • 6 Rows
  • 4-Sided
  • Ultra Quiet
  • Solid Carbide
  • Extreme Longevity
  • Crowned Leading Edge

Standard Head

ShearTec-Competition-Scredriver.png
ShearTec-Screw-Top.png
ShearTec-Comptition-Screw-Side.png

Cone-Shaped

  • Standard head only accepts max. of 65lbs of torque.
  • Standard cone-shaped design causes the knife to be brittle.

This jointer opens up a new world that allows you to control not only your edge, but now also the face.Long beds controlled by smooth hand wheels (rather than levers) & a strong precision fence with rack & pinion adjustments sets this jointer apart, all at a very reasonable price.It is the ultimate indulgence for the demanding woodworker. Of course a jointer in this class would not be complete without the ultimate cutterhead which is why this machine comes standard with Laguna’s exclusive ShearTec II head.TheLaguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.


 

Adjustment: Parallelogram With Crank

Max Width: 12″

Max Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Carbide 6 Row x 11: 66

Cutter-Head Diameter: 4″

Table Dimensions: 12″ x 87¾”

Fence Dimensions: 5⅜” x 60″

Fence Tilt: 90° & 45° with Positive Stop

Height From Floor: 33″

Dust Port: 6″

Wheel System: Built-In

Weight (Net/Ship): 875/1067 lbs

Shipping Dimensions (L x W x H): 90″ x 29.5″ x 48″

Explore All Jointer Accessories

Online Dealers

Local Dealers


 

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group

This jointer opens up a new world that allows you to control not only your edge, but now also the face.Long beds controlled by smooth hand wheels (rather than levers) & a strong precision fence with rack & pinion adjustments sets this jointer apart, all at a very reasonable price.It is the ultimate indulgence for the demanding woodworker. Of course a jointer in this class would not be complete without the ultimate cutterhead which is why this machine comes standard with Laguna’s exclusive ShearTec II head.TheLaguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.


 

Adjustment: Parallelogram With Crank

Max Width: 12″

Max Depth: 0.5″

Rabbeting Capacity: 0.5″

Knife System: ShearTec II

4 Sided Carbide 6 Row x 11: 66

Cutter-Head Diameter: 4″

Table Dimensions: 12″ x 87¾”

Fence Dimensions: 5⅜” x 60″

Fence Tilt: 90° & 45° with Positive Stop

Height From Floor: 33″

Dust Port: 6″

Wheel System: Built-In

Weight (Net/Ship): 875/1067 lbs

Shipping Dimensions (L x W x H): 90″ x 29.5″ x 48″

Explore All Jointer Accessories

Online Dealers

Local Dealers

Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.

Laguna Woodworking Facebook Group