P12|10 Panelsaw

The all new P12  panelsaws are here, available with four sizes of sliding tables: 4′, 5′, 8′, and 10′.

P12|10 Features 126″ dumbbell sliding table design , 7.5HP 3 Phase main motor, 3/4HP scoring, swing-away guard and overhead control ON/OFF.

Buy Now
Buy Online Find A Dealer

$10,999.00

SKU: MPSP12-10-0135 Categories: ,

Share this product

Description

The 126″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.

The European-style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.

The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″).

The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.

Inside the P12|10 you will find the saw unit is moving on micro-polished solid steel rods for ultimate precision.

The heavy duty motor is equipped with soft start to minimize initial amperage draw.

The P12|10 comes standard with hold-down clamp, rip shoe and push handle.

 

  • Motor: 7.5HP 3 Phase Main
  • Motor: 3/4 HP Scoring
  • Volt: 220, 1 phase, 60 Hz.
  • Blade Capacity: 12″, 14″/300mm, 355mm
  • Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
  • Max Scoring Blade: 4 3/4″/120mm
  • Scoring Adjustment: T-Handle through Cast Top
  • Arbor: 30mm Main, 20mm Scoring
  • Max Cutting Height 90° 14″/355mm Blade: 4 1/2″/115mm
  • Max Cutting Height 90° 16″/400mm Blade:5 1/8″/130mm
  • Max Cutting Height 45° 14″/355mm Blade: 2 3/4″/70mm
  • Max Cutting Height 45° 16″/400mm Blade: 3 1/2″/90mm
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4.75″/120mm
  • Dust Collection Port Guard: 4″/ 100mm
  • Sliding Table: 126″/3200 mm
  • Sliding Table Width: 14.88″/378mm
  • Main Cast Table: 21 1/2″ x 35 1/4″
  • Rip Fence: 51″/1300mm
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1 5/8″/40mm  Solid Steel Micro Polished
  • Overhead Guard with Swing-Away
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32″ x 12″ Steel Extension Table: Included
  • Crosscut Fence 2 x Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Fence Max. Collapsed: 77″
  • Crosscut Fence Max. Extended: 140″
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Ship Dimensions Body: 83″ x 47″ x 46″
  • Ship Dimensions Table: 137″ x 20″ x 15″
  • Weight (Net/Ship): 1815/2112 lbs

Manual

pdfP12|10

Where To Buy

ONLINE DEALERS | DEALER LOCATOR BELOW

DEALER LOCATOR

FB Groups


Speak and collaborate with fellow enthusiasts that own the same machine.

Laguna has created social groups hosted on Facebook for our customers to share, discuss, collaborate or just ask/answer questions they may have about their machine.