Jointers

Showing all 6 results

6″ Jointer Standard Knives

The Laguna 6″ Jointer is a premium jointer giving you more of everything.  Enclosed stand made from welded steel provides maximum strength.
1.5 HP gives you more power, longer beds (56″) allows for bigger jobs while the cutterhead equipped with 3 X HSS knives provides solid performance at a reasonable cost to replace. The fence is made from cast iron with a generous 29″ X 4″ size & tilts 45° +/- for bevel work. Motor is totally enclosed fan cooled using double V-Belts. 4″ dust port is connected to the chute that carries chips right to the outlet. Built-in wheels makes moving it around in your shop a breeze.

$999.00

6″ Jointer ShearTec II

The Laguna 6” Jointer with ShearTec II is a premium jointer giving you more of everything.Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56”) allows for bigger jobs and last but not least: 6 row ShearTec II cutterhead with a total of 42 four-sided carbide inserts gives you the smoothest cut & longest life.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

$1,399.00

8″ Wedgebed Jointer ShearTec II

The Laguna 8” Wedgebed Jointer ShearTec II Cutterhead is the perfect “step-up” jointer with increased capacity for serious woodworking.The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing.The cast-iron in-feed and out-feed tables feature independent adjustment on dovetail ways.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

$1,999.00

8″ Parallelogram Jointer

Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cabinet stand completely encases motor and pulleys to protect from dust and shavings.The specially-designed cast-iron fence is extra long for continued support throughout the cut.Modular cutterhead provides a consistently clean cut.

$2,999.00

12″ Parallelogram Jointer

Introducing the brand new 12” Laguna Parallelogram Jointer! Edge jointing is fine, but face jointing is what they all did back in the old world. Everything starts at the jointer, probably one of the most versatile machines you can own. You must have a flat surface to accomplish anything true and this is where it starts. If you want to do the job right, this is what you need.

$4,999.00

Industrial Series 16″ Jointer

The Laguna Industrial Series Jointer is the true heavyweight of jointers. Our 16″ version features a total length of over 8 feet. The heavy cast-iron tables are supported by parallelogram adjusters and controlled through precision hand-wheel adjusters. The Laguna ShearTec cutterhead is equipped with German carbide insert knives for maximum durability and quick replacement. The fence is a heavy casting supported by a large diameter shaft with rack and pinion movement for smooth, repeatable accuracy. The overhead control panel allows for quick, easy operation. The swing-away guard is easily adjustable and removable for knife replacements. Also available in 12″ models.

$8,400.00