The Laguna Bandit 4/3 is a Four Station (Top/Bottom, End-trim, Scraping & buffing) 3mm heavy duty Track feed Bander equipped with high-end electronics & motors from suppliers like Siemens, Schneider & Telemecanique. It comes with a host of features such as built in wheels system, Teflon coated Glue-tank that lowers temperature automatically to extend the life of both tank & glue. Automatic kickback of the tape so you do not have to reset it. The benefit to having a 4-station Bander over a 2-station is the scraping removes excess glue & the buffing brings the shine back to trimmed edges something that is very time consuming to do by hand. Pressure rollers: #1 is motorized & has separate pressure adjustment #2 is idle & has separate pressure adjustment. Pull out support with rollers offers support for wider panels. Numerical readout on trimmers, panel thickness makes change-over fast & accurate.
- MMotor: 220 Volt, 3 phase, 60 Hz.
- Total HP Installed: 9
- Min. Tape Thickness: 0.4mm
- Max. Tape Thickness: 3mm
- Feed Speed: 26 Ft/Min.
- Feed System: Track Feed
- Max. Panel Thickness Max:1 9/16”
- Min. Panel Thickness: 3/8”
- Min. Panel Width: 3 ½”
- Min. Panel Length: 7 13/16”
- Glue Tank Design: Thermo fused Quick heating system
- Glue Tank Capacity: 2 Liters Teflon Coated
- Glue Tank Control: Automatically Lowers Temperature to 130°
- Dust Port: 2”+ 4”
- Air Pressure: 6.5 Bar
- Top/Bottom Trim: 4 wing Insert Cutters 2mm Radius
- Top/Bottom Trim: : 2 X H.F. Motors w.0-15° tilt & Numerical Readout
- End Trim: 2 X H.F. Motor w. Saw-blade
- Scraper: Top & Bottom Edge Scraper w. Numerical Readout & By-pass Feature
- Buffing: 2 X 0.5 HP Motors w. 6” Diameter Cloth Disc & By-pass Feature
- Rough Trim: Shear cutter w. Automatic Kick-back
- Max. Coil Diameter: 31 ½”
- Pressure Roller #1: Motorized w. Separate adjustment
- Pressure Roller #2: Idle w. Separate adjustment
- Weight (Net/Ship) 2574/3050 Lbs.